WhatsApp Scan to start a chat with us!

Fire rated ceiling tiles can be chosen based on either of two different criteria, depending on their application: fire reaction (behavior of the ceiling tile itself in a fire), and fire protection (the time that the entire ceiling system holds back fire transmission, in minutes). Selection based on compliance requires choosing the correct criterion, depending on the fire strategy of the building – and when replacement is needed, it is imperative to match the same criterion used previously. This document will describe both criteria, the types of ceiling tiles, and selection methods. It is general information only, not engineering advice.
Two different fire criteria:
Tile has a reaction to fire rating of its own; fire resistance ratings apply to the entire tested system of tile and grid and structure.
For reaction to fire, the material counts. Stone wool Rockfon Artic is non-combustible and gets a best possible reaction to fire rating with low smoke production. Mineral fibre (Zentia, Knauf AMF) offers reliable reaction to fire performance that is just below non-combustible. When the space requires a specific reaction to fire rating, provide it; replacing a non-combustible tile with a less reactive one diminishes the fire resistance of the ceiling.
If the ceiling is an integral component of the fire protection system – either protecting the construction above, e.g. steel beams, or forming the fire barrier – it is rated in minutes and is dependent upon the complete tested system. For instance, Zentia Ultima Square Edge is available up to 90 minutes under steel and 60 minutes under timber as a tested assembly. It is a quality of that particular tested assembly – the specific tile and the specific grid, installed in a certain way. There is no way of obtaining and maintaining this rating by selecting only the tile.
Fire-resistant ceilings should be replaced with care. When the ceiling is designed for a fire performance rating, this is not an area to experiment. The ceiling will be required to maintain its fire performance rating; otherwise, there is a risk of undermining fire protection in the building, which is not acceptable for fire safety and legal compliance reasons. Determine what performance rating the ceiling is required for and provide exactly that, reinstating fire-tested fire-protecting systems if they exist.
Fire safety is regulated, and this advice is only general, not fire-engineering advice. Responsibility for providing correct fire performance belongs to the building’s designers and compliance specialists; for any fire-protecting ceiling, this requirement needs to be checked against the building specification and, if necessary, a competent fire engineer consulted. RCT can provide tiles at a given reaction-to-fire class or within a tested fire-protecting system, with datasheets, but the specification decision is up to the building owner.
There are two types: fire reaction (the tile itself – using Class O and the Euroclasses systems) and fire protection in minutes (the whole ceiling system and how long it will resist fire). The minute fire rating is for a tested system, not the tile only.
The Stone Wool ceiling tiles (Rockfon Artic), which have the highest fire reaction class possible along with low smoke generation. Mineral Fiber Tiles provide reliable performance one class lower than non-combustible. Check the classification on the datasheets.
A tested system consisting of tile, grid and structure as described in the specification, not the tile only. For instance, a Zentia Ultima square edge tile can have up to 90 minutes fire resistance when used with steel structures and up to 60 minutes with timber structures.
Only if the ceiling was designed with specific fire rating criteria. Failure to match can negatively affect the fire protection plan of the building. Follow the specification and seek a professional’s help if you need to.
Explore our range of fire rated tiles, from non-combustible stone wool tiles to our Rockfon, Zentia and other product ranges.
Specifying or matching a fire rated ceiling? Contact us on 01939 251 450 – we can supply to class or tested systems with data sheets.

Disposing of the old tiles should be done responsibly as there are several ways of managing the end of life of ceiling tiles based on the materials used and the state of the tile. Recycling of recyclable materials such as glass wool, stone wool and metal tiles will always have a better fate than being dumped into landfills. Reusing of usable tiles prevents waste of valuable resources. This article gives an overview of what can be done with the old tiles and how to do that.
Before getting rid of the tiles that have been removed, one should first find out if some of the tiles can still be reused. Sometimes, tiles are removed due to problems with a small section of them and those sections may actually be in good shape. Undamaged tiles can be stored for future replacement of the single damaged tiles. This method requires no expenditure and makes the least impact on the environment.
Recyclability depends on the material:
However, there is no standard set of recycling routes, which will vary depending on the location and what recycling or manufacturer schemes are available. Manufacturer recycling schemes
There are manufacturer take-back schemes which may provide recycling opportunities for some types of ceiling tiles, especially mineral wool tiles. In this case, they can be recycled rather than sent to landfills. However, such schemes change over time and depending on the manufacturer of the product. If you need to recycle the tile, it is advisable to check the availability of the manufacturer scheme for the specific product. Where such a scheme exists, it is usually the best option for disposal.
In the absence of recycling or reuse possibilities, the removed tiles will be treated as construction and demolition waste and will be disposed of with a waste carrier. It should be noted that gypsum tiles will usually be sorted out from general waste due to recycling and landfill legislation. Try to keep your tiles segregated by type of material, as it is easier to recycle and cheaper to dispose of them.
End-of-life handling is easiest when planned alongside the replacement, not as an afterthought:
The most environmentally friendly way of handling the end-of-life of ceiling tiles involves following a simple hierarchy whereby reusable tiles are repurposed first, tiles that have reached their lifecycle should be recycled where a route is available and finally any remaining should be disposed of. This process not only saves the environment but saves cost at the same time. In relation to the above discussion, the fact that maintenance of a ceiling will produce less waste than replacing it is an important aspect.
Separate the reusable tiles from other types and segregate the tiles based on materials, recycle the available material where there is a route (recycling of metal, glass wool, stone wool and gypsum is possible), and the remaining ones can be sent to the landfill using a licensed carrier.
Yes, some can be recycled since there are many ways of recycling them depending on the material they are made of. Metal is generally recyclable, glass wool and stone wool are recyclable through mineral wool recycling while gypsum is recyclable.
The tiles that have been removed due to a localized issue or access requirement can be stored as spares in order to replace them in the future – the least environmentally invasive and cheapest approach. Only those tiles which are truly failed will require disposal.
This does not always have to be the case – reuse sound tiles, recycle them where there is such an opportunity and dispose of the remaining ones as construction waste. In any case, gypsum, in particular, is usually separated from ordinary landfills.
Replacing tiles? Store sound tiles as spares and get replacement tiles among the Suspended Ceiling Tiles collection.
Need to replace tiles but also keep waste to a minimum?
The performance of ceiling tiles depends on a relatively small set of measurable features: acoustic absorption and insulation, fire performance, moisture and humidity resistance, light reflectance, durability and, more recently, environmental and end-of-life considerations. The key to selecting ceiling tile is to choose the one which provides the required level of performance – and when replacing an existing ceiling tile, to match the original performance. The guide below explains all performance features in detail and explains how to choose and specify the correct tile.
A ceiling tile is more than just a cover – it performs a number of tasks. It absorbs noise to make the room comfortable, helps in fire protection strategy, prevents moisture damage to the ceiling in wet rooms, reflects light to make the room illuminated and represents the environmental impact of the building. Choosing replacement tile means maintaining the performance of the original tile, while specifying a new ceiling tile requires matching the performance to the room’s requirements. Otherwise, a ceiling tile will fail despite its perfect fit.
Acoustic performance breaks down into two qualities: absorption (absorption of sound to minimize reverberation within the space) and insulation (resistance to sound transmission from one room to another by way of the ceiling void). Various spaces have various requirements – open plan office environments and classrooms require absorption; consultation and meeting rooms require insulation. Glass wool (Ecophon Advantage) and stone wool (Rockfon Artic) stand out in terms of absorption while mineral fibre (Zentia, Knauf AMF) provides a balanced performance level. You can refer to our acoustic ceiling tiles guide on how to match and select.
Fire performance has two components: reaction to fire (behavior of the tile itself – measured in terms of ‘Class O’ and Euroclass ratings) and fire resistance (minutes rating of the fire resistant ceiling system). Stone wool (Rockfon Artic) is non-combustible; mineral fibre has reliable reaction to fire performance; and a minutes-rated fire-resistance ceiling system will be a function of the complete system tested and not the tile alone. You can refer to our fire rated ceiling tiles guide on how to choose.
The ability of a ceiling tile to resist moisture and humidity is important for any place where humidity is present: kitchens, bathrooms, showers, and especially the case of pools and spas. Mineral fibre softens, absorbs moisture and droops; gypsum is moisture-resistant and cleanable (British Gypsum Satin Spa); metal is waterproof and strong (Burgess CEP); stone wool is water repellent and mold resistant (Rockfon Artic). Special humidity-intensive case of pools requires special tiles and anti-corrosive grid. Check out our guide on humid environments ceiling tiles.
The light reflectance value (LRV), or ability of a ceiling tile to reflect light, determines how bright a room appears and how efficient its lighting systems will work. High LRV white tiles brighten up a room and improve performance of its lighting; this is why virtually all commercially available tiles are white. While replacing them, the matching of reflectance will be helpful, as the new tiles will appear brighter than old ones. This property is discussed in our more general guide on matching brightness while replacing tiles.
Durability varies significantly depending on material. Metal (Burgess CEP) is the most durable type and resistant to knocks and wear and tear; gypsum is strong and durable; soft fiber tiles are less durable, as they give preference to sound insulation. Durability is the key requirement in high-traffic zones, sports or backstage areas, while for an office where people work quietly, acoustics are more important. Consider durability in terms of how the room will treat the ceiling.
The performance properties hardly operate individually. They contradict each other, and that’s why there’s no universal tile that excels in everything. For example, a very absorbent acoustic tile is soft and less durable; gypsum and metal tiles that are solid and can be easily wiped from dirt reflect sound better than they absorb it; the stone wool tile is non-combustible, moisture-resistant, provides good acoustics but is more expensive than mineral fibre tiles. The art of specification is to understand what properties are really required and make a trade-off on the rest. A meeting room is focused on thermal insulation and appearance; a pool hall requires water-resistance and corrosion resistance; a classroom needs acoustic and fire properties.
As customers become more concerned about the environmental performance of a tile, including the recycled content, the ability to recycle the material, low VOCs and formaldehyde, and embodied carbon, along with what happens to the tile at the end of its lifecycle, there are choices such as glass wool (Ecophon Advantage), which is recyclable and contains no additional formaldehyde, nor does it contain high VOCs. Stone wool and other materials have their own environmental performance measures.
If you need to replace tiles, then the most sensible thing to do is to match the performance that the old tile gave – particularly in terms of fire resistance and sound reduction. Find out what tile was there and get the data on the rating levels and either match for match or find a new one with equivalent figures. This is a choice of action: improving the acoustic performance of a noisy space may make sense when you are replacing it, but reducing fire performance is never accidental.
RCT has tiles in every possible performance range available – from acoustic glass and stone wool (Ecophon, Rockfon), balanced mineral fiber (Zentia, AMF), moisture resistant gypsum (Satin Spa) and metal tiles (Burgess CEP), to corrosion resistant Donn grid system for harsh conditions, and can give you the data sheets so that you can match the appropriate numbers. Send us your requirements and we will advise you on what tiles would fit your needs. All this information is included in the guides in this cluster.
Acoustic absorption and thermal insulation, reaction to fire and fire resistance, moisture resistance and humidity, light reflection, durability, and eco and end-of-life properties. Choose the tile which suits your room needs and when replacing, that which provided before.
No there is no such tile as it depends on your room. Glass wool is the best for acoustic absorption, stone wool is the best in terms of fire and moisture resistance, gypsum and metal tiles are good in terms of durability, and mineral fiber gives balanced performance.
Do I need to consider performance while replacing my ceiling tiles?
Yes definitely you need to consider performance, especially for fire and acoustic ones because it will make difference in your room performance and compliance. Identify performance ratings of your previous ceiling tiles and replace with the same or equivalent.
Moisture-resistant gypsum (Satin Spa), water-repellent metal (Burgess CEP) and water-repellent, mould-resistant stone wool (Rockfon Artic). Pool and spa environments are a specialist case needing suitable tiles and a corrosion-resistant grid.
Yes, most have got environment-friendly certificates – recycled material, recyclable product, low VOC and formaldehyde, and low embodied carbon. An example includes glass wool ceiling (Ecophon Advantage) that is recyclable and contains no added formaldehyde and low VOC.
Get the best performance ceiling from our brands range – Ecophon, Rockfon, Zentia, Knauf AMF, British Gypsum and Burgess CEP.
Need advice regarding ceiling performance specification? Phone us on 01939 251 450.
Recycled content, recyclable, indoor air (low VOCs and formaldehyde) quality, durability, and embodied carbon – as well as the ability to recycle old ceiling tiles, not just dispose of them in the landfill. As sustainable building regulations become ever stricter, such criteria are becoming increasingly part of the criteria for selecting tiles. In this guide, we will explain how a ceiling tile becomes sustainable and which of our ranges have good environmental credentials.
There are many aspects to sustainability in ceiling tiles:
In truth, a truly sustainable choice is one that balances all these together and does not look at just one single number.
The Ecophon Advantage (glass wool) is an environmentally friendly product because it is recyclable, contains no added formaldehyde and has very low emissions of VOC which leads to healthy indoor air. Where the project needs to be both sustainable and have good indoor air quality, glass wool is definitely an option that should not be overlooked because, apart from the two benefits above, it has amazing acoustic properties as well.
Every material has something special about it. The stone wool (Rockfon Artic) comes from abundant volcanic rock and is recyclable while being non-combustible and durable which helps the product have a long lifespan. The metal (Burgess CEP) is durable and recyclable material thus allowing you to have a metal ceiling that will last you decades and can be easily recovered when its time has come. The mineral fiber (Zentia, AMF) has different features depending on the product.
Often overlooked, a durable tile is an environmentally conscious choice as every new tile has a cost in materials, transport and waste; a durable tile that will last for many decades is more sustainable than one that needs replacing frequently. When considering your choices, consider its expected longevity along with recycled and recyclable content, as the most sustainable tile will likely be the one you don’t have to change.
The most sustainable course of action is often fixing, rather than replacing. A partial replacement of a few broken tiles in a good ceiling, or finding a suitable replacement for your old tile is far more sustainable than a total replacement of the ceiling. Keeping your ceiling in operation through strategic replacement is a cost-effective way of making minimal impact on the environment.
For a sustainability-based specification, request the environmental credentials and data sheets from your suppliers, factor in recycled content, recyclability, indoor air quality credentials and lifespan, and take into account the end of life disposal for both the new and old tiles. RCT have products that have excellent environmental credentials, for example Ecophon glass wool, and can provide data sheets to assist in your sustainability evaluation. Compare the environmental credentials to the project requirements as well as the standard performance criteria.
Recycled content, recyclability at the end of life, low VOCs and formaldehyde free for good indoor air quality, durability and lifespan and carbon footprint. An overall sustainable product considers all of the above rather than just one aspect.
The Ecophon Advantage (glass wool) have excellent environmental credentials as it is recyclable, no added formaldehyde and low VOCs. Stone wool (Rockfon) and metal (Burgess CEP) are recyclable and durable products. Individual data sheets should be consulted.
Yes, many can. Glass wool tiles, stone wool tiles and metal tiles can be recycled. The recycling method varies with the type of material. Mineral fibre tiles may depend on the product. Get your datasheets, and take into consideration the recycling process of your removed tiles.
We should repair. Replacement of some ceiling tiles or replacing a discontinued ceiling tile with an alternative will be more sustainable than replacing all the ceiling tiles. The most sustainable tile is the one that you do not need to replace, so having a functional ceiling will be very sustainable.
Discover tiles that have strong environmental credentials and recyclable glass wool in our Ecophon and Rockfon range.
Sustainability specifications? Contact us at 01939 251 450 for our environmental credentials and datasheets or quotation.
Acoustic ceiling tiles have two separate mechanisms to manage noise in a room – absorption, where sound is absorbed in order to prevent sound reverberation and echo, and insulation, which is the prevention of sound transfer from one room to another through the ceiling cavity. It is necessary to understand what each property is about in order to choose the appropriate acoustic tile for noise reduction.
There are two separate concepts which are often confused:
Absorption of sound – decreases reverberation and echo in a room, which makes the space more peaceful and clear. Necessary in open plan offices, classrooms, restaurants, call centres.
Insulation of sound (attenuation) – prevents sound transfer between rooms through the ceiling cavity, which provides necessary privacy. Important in meeting rooms, consultation rooms, confidential offices.
The acoustic ceiling tile might be very good at one property, while mediocre at the other one, therefore, you need to know which one to look for first.
When it comes to sound absorption in a room, soft fiber tiles perform well. Ecophon Advantage (glass wool) is the specialized high absorbing tile which is ideal for reverberant open-plan spaces. Rockfon Artic (stone wool) offers excellent sound absorption along with being non-combustible. Mineral fiber tiles (Zentia, Knauf AMF) offer good balanced absorption in general commercial spaces at affordable prices. The more reverberant and important for speech intelligibility the space is, the more value absorption adds.
Insulation is more related to the overall ceiling and partition system as it involves sound traveling through partitions from one room to another via a common ceiling cavity. A dense tile may be helpful here but a good room-to-room insulation requires not only a good tile but an entire system including the tile itself, the grid, and partition/ceiling connection. If privacy is an issue, it should be considered as such and replaced by the same system.
Choose by what the room does:
When replacing acoustic tiles, keep the same level of performance – switching from a high-absorption acoustic tile to a simple reflector makes the space considerably louder, while reducing the insulation of the ceiling build-up reduces privacy. Determine the existing tile type and its acoustic rating, and then either match like-for-like or select something else that has comparable figures. Replacement is a great opportunity to improve the acoustics of the space that has never been good enough before.
Since acoustic tiles come with acoustic ratings (coefficients and classes), when selecting them for a particular space, it is better to look at the datasheet rather than at the tile looks – two seemingly identical tiles can have very different acoustic properties. RCT provides acoustic tiles with datasheets that can be used for matching the right figures for your space.
Ceiling tiles that provide noise control either by absorbing noise and reducing the reverberation in the room or by insulating from noise transfer from one room to another through the ceiling cavity. There are various ceiling tiles and systems offering each property; choose the right one according to what you require.
Noise absorption absorbs the noise inside a room and eliminates the effects of reverb; noise insulation provides protection from the transfer of noise from one room to another through the ceiling cavity. Noise absorption is required in open plan spaces while noise insulation is needed in private rooms as it is determined by the complete build-up.
Will acoustic tiles stop noise between rooms?
Only partly on their own – room-to-room insulation depends on the whole ceiling and partition build-up, not the tile alone, because sound travels over partitions through the shared void. Address it as a system for genuine privacy.
See acoustic tiles from Ecophon, Rockfon, Zentia, and Knauf AMF products backed by data sheets.
Noise control for a particular area? Dial 01939 251 450 with your room dimension along with the acoustic specification to get the right tile along with the measurements, or even a quote.
Moisture resistant ceiling tiles are tiles that have been designed to withstand moisture without sagging, warping or developing mold; important in kitchens, washrooms, showers and even the more difficult case of pools and spas. Conventional soft mineral fibre tiles are absorbent and hence do not perform well in such environments, making it necessary to have moisture resistant tiles, while the pool environments also call for corrosion-resistant grids. This manual discusses how to select tiles for humid and wet environments starting with bathrooms and ending with the more complex pool environment.
Soft mineral fibre tiles are absorbent and therefore tend to absorb moisture in a humid environment, losing their rigidity and sagging, warping or developing mold in the process. A tile that will do fine in a dry office will certainly disappoint in a humid environment. The more humid and wet the environment, the more moisture resistant the tile (and grid) should be.
From the range of RCT, the moisture-resistant tiles include:
Commercial kitchens, washrooms and shower areas face steam, splashing and frequent cleaning, but not the extreme chemistry of a pool. Wipe-clean, moisture-resistant tiles – gypsum (Satin Spa) or metal – handle these areas well, staying clean and resisting the humidity. Match the tile to the moisture level: a washroom with occasional steam is less demanding than a constantly wet shower block, but both want a moisture-resistant rather than absorbent tile.
The environments in swimming pools and spas represent an entirely different level of seriousness. The constant presence of very high humidity together with chemicals used in the pool like chlorine forms a highly corrosive environment that affects both the tiles as well as, most importantly, the metal grid structure. Tiles become soft and disintegrate; the steel grid corrodes and may eventually fail due to its weight on top of the pool. Therefore, pool ceilings require:
This means that the tiles and grids for pool and spa applications should be specified through specialised consultation and not just selected from a general range – consult with RCT on this so that the tiles and grids are matched to the environment.
It is easy to concentrate on the tile and neglect the grid, but in humid and particularly pool environments the grid is where things often go wrong. If you have a moisture resistant tile installed on a corroded grid system then you will get nowhere. Ensure that your grid system has the necessary corrosion resistance properties as required by the environment.
Moisture resistant tiles – gypsum (British Gypsum Satin Spa), water resistant metal (Burgess CEP) and water resistant mould resistant stone wool (Rockfon Artic). Don’t choose absorbent soft mineral fibre as it will sag and distort in humid conditions.
No soft mineral fibre tiles can be used due to their absorbency leading to sagging. Use moisture resistant tiles like gypsum (Satin Spa) and metal and specify according to your environment – a steam room is much more challenging than a washroom.
Swimming pools have a unique environment of moisture, chemicals and need corrosion resistant grid – not ordinary soft fibre and standard steel grid. Swimming pool ceilings are not for amateur specification. Speak to the RCT team.
In humid conditions, and in particular pool environments, failure begins with the grid – a standard steel grid deteriorates. The moisture-resistant tile mounted on a deteriorating grid fails anyway, so ensure that the corrosion resistance of the grid matches the environment, using a corrosion-resistant system such as Donn where appropriate.
Discover moisture-resistant tiles and corrosion-resistant Donn grids from our range of British Gypsum, Burgess CEP and Rockfon products.
Specification of wet, humid or pool environments? Phone 01939 251 450 – we’ll specify a tile and grid system to suit the environment. Quote now.